Huawei routing WS5200 experience

The Huawei WS5200 router uses a large antenna design and can display two signal bands of 2.4GHz and 5GHz.Huawei S5700 Switch S5700 28P Pwr Li Ac Poe Switch With 24 Ports

After bringing the WS5100 not long ago, Huawei recently brought an upgraded version of the WS5200 router. In terms of specifications, its wired transmission rate is 10/100/1000Mbps, wireless transmission rate is 1200Mbps, and wireless network support frequency is 2.4G/5G. Let's get to know each other.s2700 26tp pwr ei conmutador huawei, enrutadores de red

Like the outer box, the WS5200 router also uses a white body color scheme, and the four large antennas are conspicuous. In addition, the antenna surface is prismatic and supports folding. Different from traditional dual-band routers, Huawei claims that the WS5200 router can combine the two signal bands of 2.4GHz and 5GHz. The specific switching logic is to automatically switch to the 5G frequency band when the 5G signal is good, and switch back to the 2.4G frequency band if the 5G signal is not good or needs to pass through the wall.устранение неисправностей для коммутатора huawei5700


The hi key of the WS5200 router is located at the center of the top of the fuselage. This is the same design as the previous WS5100, but the square is replaced by a circle. The back of the fuselage uses an irregular design. According to official data, its body measurements are 205 x 120 x 36.8mm. However, since the bottom of both sides of the WS5200 router is curved, it seems to be thinner in terms of intuitive vision. It is worth mentioning that due to heat dissipation, the WS5200 router has a large number of strip vents on the bottom of the fuselage. The interface section is still located behind the fuselage. It includes 1 Wan Gigabit Ethernet port and 4 Lan Gigabit Ethernet ports.Huawei Gpon Epon Onu Ma5698 With Ge Fe E1 Service Ports